Product Description
- Wilwood's purpose-built and designed shut-off valve uses much less power and runs much cooler than line lock valves
- The valve does not prevent fluid from returning to the master cylinder, this eliminates the possibility of trapping pressure when activating the valve (will not drag brakes)
- This is NOT a line lock assembly, line locks are not designed to be kept in the ON position continuously and can overheat and fail if used as a shut-off, line locks can also trap pressure in the brake system and cause the brakes to drag
- Requires a 12 volt, 5 amp (recommended) fused power source through a toggle switch
- Note: Both wires coming out of brake shut off are black; 1 connect to postive 12v battery and 1 to ground. Does not matter which wire to positive or ground
Warning: Not a line lock assembly. Not for street use. Please read instruction sheet DS572 before attempting installation.
